Answers are grounded in this paper and cite their sources.
Compares freeze-thaw performance of self-compacting concrete with different materials, suggesting better durability with specific replacements.
Comparative evidence on how different supplementary cementitious materials affect freeze–thaw performance and air-void system characteristics of self-compacting concrete (SCC) under consistent mixture conditions remains limited. This study provides a direct comparative assessment of ground granulated blast-furnace slag (GGBFS), fly ash (FA), and limestone powder (LM) as partial cement replacements in SCC within a unified mix-design framework. SCC mixtures incorporating 15% and 30% of GGBFS, FA, or LM were evaluated for fresh properties (slump flow, V-funnel, L-box) and for mechanical performance (compressive and splitting tensile strength, modulus of elasticity) at 28, 56, and 90 days. Freeze–thaw performance was evaluated after 150 cycles, while the hardened air-void system was characterized using total air content (A), micro-air content (A 300 ), and spacing factor (L). Selected mixtures were examined by SEM/EDS and complemented by a limited quantitative SEM texture assessment at fixed magnification to support microstructural interpretation. Statistical analysis (two-way ANOVA and Tukey HSD) and regression-based relationships were used to strengthen the comparison. The results show that FA primarily improved flowability, reaching a slump flow of 740 mm at 30% replacement, whereas GGBFS provided the most favorable balance between late-age mechanical performance and freeze–thaw resistance, achieving 69 MPa compressive strength at 90 days and only 0.2% mass loss and 1.0% strength loss after F150 at 30% replacement. LM contributed to stabilizing the protective air-void network, while the lowest spacing factor (L = 0.11 mm) was observed for GGBFS30 and LM30. Importantly, freeze–thaw strength loss was more strongly associated with spacing factor L than with total air content, highlighting void spacing as a practical durability-oriented predictor for SCC incorporating SCMs. Overall, the findings support clinker reduction strategies while maintaining durable SCC performance.
No takes yet. Share an insight, caveat, or question.
Rudnicki et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: