Answers are grounded in this paper and cite their sources.
Evaluates weld integrity in aluminium alloys, suggesting improved joint strength with DDFW techniques.
The growing demand for lightweight, high-strength materials in the aerospace and automotive industries has brought aluminium alloys such as AA2024-T351 into the spotlight due to their outstanding strength-to-weight ratio. However, achieving reliable joints in such alloys remains a significant challenge, particularly when using conventional welding techniques. To address this, the present study focuses on optimizing process parameters in Direct Drive Friction Welding (DDFW) for AA2024-T351. A novel drilled-to-bossed geometry, inspired by the traditional mortise-and-tenon joint, is introduced to enhance mechanical interlocking and improve weld integrity. Experimental trials were systematically designed using an L 18 orthogonal array to evaluate both tensile and torsional strength. The experiments were conducted on a customized engine lathe, with friction pressure, forging pressure, spindle speed, faying surface geometry, and friction time selected as the controllable process parameters. In parallel, advanced deep learning models, including an ensemble residual network, a compact attention network, and an adaptive multiscale network, were implemented to predict ultimate tensile strength based on the welding conditions. The results revealed that the optimal parameter combination of 30 MPa friction pressure, 70 MPa forging pressure, 2200 rpm spindle speed, drilled-to-bossed geometry, and 4 min of friction time yielded exceptional mechanical performance, achieving a tensile strength of 538 MPa and torsional strength of 325 MPa. The drilled-to-bossed configuration demonstrated significantly higher joint strength compared to conventional flat-to-flat joints. Moreover, among the deep learning models, the ensemble residual network achieved the highest predictive accuracy with an R² value of approximately 0.81, effectively capturing the complex relationship between process parameters and weld strength.
No takes yet. Share an insight, caveat, or question.
Sefene et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: