Answers are grounded in this paper and cite their sources.
Abstract (Ba 1− x Sr x )(Mn y Ti 1− y )O 3 (BSMT) ceramics with x = 35, 40 mol% and y = 0, 0.1, 0.2, 0.3, 0.4, 0.5 mol% were prepared using a conventional solid-state reaction approach. The dielectric and ferroelectric properties were characterized using impedance analysis and polarization-electric field ( P – E ) hysteresis loop measurements, respectively. The adiabatic temperature drop was directly measured using a thermocouple when the applied electric field was removed. The results indicate that high permittivity and low dielectric losses were obtained by doping 0.1–0.4 mol% of manganese ions in (BaSr)TiO 3 (BST) specimens. A maximum electrocaloric effect (ECE) of 2.75 K in temperature change with electrocaloric strength of 0.55 K·(MV/m) − 1 was directly obtained at ∼21 °C and 50 kV/cm in Ba 0.6 Sr 0.4 Mn 0.001 Ti 0.999 O 3 sample, offering a promising ECE material for practical refrigeration devices working at room temperature.
No takes yet. Share an insight, caveat, or question.
Niu et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: