Answers are grounded in this paper and cite their sources.
High-strength titanium (Ti) alloys are progressively demanded for structural applications in weight-critical aerospace industry. Improving mechanical properties of the alloys are thus exploited in response to the requirement. In this study, a strategy of through-transus thermomechanical forging was applied to the Ti–10 V–2Fe–3Al metastable β-Ti alloy, and the resulting microstructures and mechanical properties were systematically investigated in comparison to the conventional (α+β) dual-phase field forging. It is found that the through-transus thermomechanical forging significantly enhances strength, ductility and strain hardening capacity, while it is the inferior combinations of mechanical properties in the alloys subjected to the (α+β) dual-phase field forging. Microstructural characterization reveals that the former renders the hierarchical microstructure composed of intergranular αp-necklaces, and intragranular αp-rods as well as αs-lamellae in the β-matrix. The superior combinations of mechanical properties are conferred by good strain compatibility of these microstructural constituents. By contrast, the latter renders the network microstructure comprised of intergranular globular αp-phase and continuous grain boundary (GB) αGB-films as well as the intragranular αs-lamellae. Local deformation-damage is more preferred to initiate in the intergranular network structure. These findings provide fundamental understanding on the correlation between mechanical properties and microstructures, facilitating manufacturing high-performance β-Ti alloys at an industry scale using commercially available thermomechanical processing.
No takes yet. Share an insight, caveat, or question.
Bao et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: