Thresholds of aeolian sand transport: establishing suitable values

This paper assesses the practical use and applicability of the time fraction equivalence method (TFEM; Stout & Zobeck, 1996) of calculating a wind speed threshold for sand grain entrainment in field situations. A modification of the original method is used and is applied to 1 Hz measurements of wind speed and sand transport on a beach surface. Calculated grain entrainment thresholds are tested in terms of the percentage of sand transport events that they explain. It was found that the calculated thresholds offered a poor representation of the occurrence of saltation activity, explaining only about 50% of the measured transport events. Results are discussed in terms of system response time, wind speed measurement height, undetected events and sampling period. A shear velocity threshold for grain entrainment was also calculated, but this also failed to explain a high proportion of the sand transport events. The best results (67–91% of transport events explained) were found by calculating a threshold based on time‐averaged (≈ 40 s) wind velocity measurements. The applicability of a single threshold to a natural grain population is discussed. A natural surface is likely to possess a range of thresholds varying over short time scales in response to parameters such as grain rearrangement and changes in moisture conditions. The results show that calculated thresholds based on 40 s time‐averaged data consistently explain a high proportion of the recorded sand transport events. This is because such a time‐averaged approach accounts for higher frequency variability inherent in the sand transport system.