Answers are grounded in this paper and cite their sources.
In the present study, six organic solvents that are commonly used in the paint industry (1-butanol, 1-methoxy-2-propanol, 2-propanol, butyl acetate, propylene glycol monomethyl ether acetate, and diethylene glycol monobutyl ether) were tested for their ability to dissolve two distinct lignins: an industrial kraft lignin (KL) and a pilot-scale organosolv lignin (OL). Among the solvents investigated, 1-methoxy-2 propanol (Dowanol™ PM, DPM) and diethylene glycol monobutyl ether (Butyl Carbitol™, BC) demonstrated high degrees of solubility (> 98 wt. % at 25 °C) that were comparable to the commonly used lignin solvent, dimethyl sulfoxide (DMSO). Lignin coatings were prepared by spray-coating the new lignin-solvent solutions on iron-phosphated steel, prior to investigation of their subsequent morphological and electrochemical performance characteristics. It was found that KL/DPM coatings demonstrate suitable short-term (1 h, 5% NaCl) anticorrosive characteristics with an increased charge transfer resistance (Rct) compared to the bare steel (1.5 × 105 Ω. cm2 cf. 1.9 × 103 Ω. cm2). However, a prolonged (24 h) immersion resulted in a decrease in Rct values (1.1 × 104 Ω. cm2), which may indicate that the lignin coating alone is unable to provide long-term protection under these aggressive conditions.
No takes yet. Share an insight, caveat, or question.
Dastpak et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: