Answers are grounded in this paper and cite their sources.
The removal of Cr (VI) from aqueous solution using two strong base anionic resins with gel structure, Purolite A-400 (styrene-divinylbenzene matrix) and Purolite A-850 (acrylic matrix) was investigated in batch technique. The sorption efficiency was determined as a function of phases contact time, solution pH, resin dose, temperature and initial Cr (VI) concentration. The percentage of Cr (VI) removed reaches maximum values (up to 99 %) in the pH range 4 - 5.3 under a resin dose of 6 g/L and of Cr (VI) concentration up to 100 mg/L. An increase in temperature has a positive effect on the Cr (VI) sorption process. The equilibrium sorption data were fitted with the Freundlich, Langmuir and Dubinin-Radushkevich isotherm models, using both linear and nonlinear regression method. The Langmuir model very well verifies the experimental data and gives the maximum sorption capacity of 120.55 mg Cr (VI)/g and 95.82 mg Cr (VI)/g for A-400 and A-850 resins, respectively. The thermodynamic study and mean free energy of sorption values calculated using Dubinin-Radushkevich equation indicated the sorption is a chemical endothermic process. The kinetic data were well described by pseudo-second order kinetic equation and the sorption process is controlled by external (film) diffusion and intraparticle diffusion.
No takes yet. Share an insight, caveat, or question.
Balan et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: