Answers are grounded in this paper and cite their sources.
This study aimed to enhance the initial adhesion performance of reactive polyurethane hot-melt adhesives by using a bio-based polycarbonate polyol instead of traditional polyester or polyether polyols and by incorporating thermoplastic polyurethane (TPU) in varied proportions. Adhesives synthesized from bio-based polycarbonate polyols and polypropylene glycol with MDI as the isocyanate were characterized chemically, thermally, and mechanically (FTIR, DSC, plate-plate rheology, DMA, and T-peel strength test). Adding 10-15 wt.% TPU significantly improved green strength and initial adhesion at room temperature and after accelerated cooling. The bio-based polycarbonate polyol promotes superior flexibility at low temperatures compared to fossil-derived alternatives, aligning with sustainability objectives. The results showed that 10 wt.% TPU maximized green strength without compromising flexibility, whereas 15 wt.% TPU, though enhancing adhesion, reduced flexibility due to increased crystallinity. T-peel tests on footwear materials indicated that all the adhesives exceeded the EN 15307:2015 requirements, with the highest peel strength achieved after curing. These findings highlight the benefit of bio-based polycarbonate polyols and TPUs in achieving strong, flexible, and eco-friendly adhesives suitable for demanding applications.
No takes yet. Share an insight, caveat, or question.
Moyano et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: