Answers are grounded in this paper and cite their sources.
Long-term aging reduces impact toughness in Inconel 625, indicating microstructural changes influence fracture behavior.
Inconel 625 is widely used in high-temperature structural components because of its excellent strength, toughness, and corrosion resistance. However, long-term exposure to elevated temperatures can induce precipitation of carbides, γ″ phase, and δ phase, leading to microstructural degradation and reduced mechanical reliability. Although precipitation evolution and tensile properties of aged Inconel 625 have been widely studied, the relationship between long-term precipitate evolution and impact fracture behavior remains insufficiently clarified. In this study, solution-treated Inconel 625 alloy was aged at 700 °C and 750 °C for up to 5000 h, with additional stress-assisted aging at 750 °C under 30 MPa and 51 MPa. Impact toughness, microhardness, fracture morphology, and precipitate evolution were systematically investigated. The results show that long-term aging significantly reduces impact toughness at both room and elevated temperatures, with a more pronounced reduction at room temperature. The room-temperature impact energy decreases from 314 J to approximately 10 J and stabilizes after 2000 h. Quantitative analysis shows that γ″ precipitate coarsening follows the Lifshitz–Slyozov–Wagner relationship, indicating diffusion-controlled growth. Stress-assisted aging under the present low stress levels has only a limited influence on precipitate evolution and impact toughness. The toughness degradation is mainly attributed to chain-like grain-boundary carbides and needle-like or plate-like δ phase, which embrittle grain boundaries, segment the austenitic matrix, and limit impact energy absorption.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: