Answers are grounded in this paper and cite their sources.
Explores solidification dynamics in round billet, suggesting M-EMS enhances quality.
A fully couple flow of molten steel, heat transfer, and solidification in the mold region of a continuous casting round billet under mold electromagnetic stirring (M-EMS) are investigate with computational tools of fluid flow and electromagnetic simulations. A finite element model is employed to simulate the electromagnetic stirrer in the mold and calculate the Lorenz force distribution. The Lorenz forces are applied as a source term in the Navier–Stokes equations of the fluid flow model, which was solved through a finite volume model. The flow pattern produced by the stirrer is mainly rotational, with velocities of 0.37 m s−1 close to the solidifying shell for the higher current. The results indicate that a higher M-EMS current produces a reduction of the temperature in the strand center; a decrease of 42 °C is observed for a current of 350 A/4.25 Hz. The M-EMS also produces a thinner shell close to the stirrer center and a larger region of solid fraction in the billet center.
No takes yet. Share an insight, caveat, or question.
Trindade et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: