Answers are grounded in this paper and cite their sources.
Measures sound levels and dynamics in gaseous diffusion flames, indicating significant correlations with flame characteristics.
Sound generation mechanisms from premixed flames are generally well understood, unlike those for diffusion flames. Wildland fires are almost exclusively sound-generating diffusion fires ranging from low-frequency puffing and mid-frequency roaring up to high-frequency crackling. Our goal is to better characterize the mid- to low-frequency acoustic emissions of gaseous diffusion flames and the underlying flame dynamics responsible for the sound generation. We performed simultaneous acoustical and optical measurements of laboratory-scale fires at the United States Forest Service Forest Products Laboratory. The experiments were designed to capture the effects of burner geometry, heat release rate, fuel type, and premix ratio on flame dynamics and acoustic emissions. The results revealed a strong correlation between visible light emissions and acoustic pressure fluctuations. The measured sound levels scaled well with heat release rate. The strongest sound levels of the flames were found in the infrasound regime and continued to roll off through the low-audible frequency range. The type of gaseous fuel was found to impact the flame dynamics and the audible sound spectrum. The Strouhal number, defined using a variance lengthscale and bulk advection velocity, provided a good collapse of both the acoustic and optical spectra of the flames.
No takes yet. Share an insight, caveat, or question.
Szoke et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: