Answers are grounded in this paper and cite their sources.
Shows enhanced piezoelectric properties in ZnO films, suggesting improvements for sensor applications.
ZnO films with a crystal structure in which the c-axis is parallel to the substrate are suitable for shear wave excitation. They are expected to be applied as thickness shear mode resonators for measuring liquid viscosity and antigen-antibody reactions. Our previous studies have shown that these c-axis parallel-oriented ZnO films can be obtained by bombarding the substrate with accelerated ions during sputtering deposition. In this study, DC negative bias voltages were applied to the substrate to increase the positive ion bombardment, in order to improve crystalline orientation and piezoelectric properties. ZnO film samples with a thickness of 2 μm were prepared on Al/silica glass substrates using RF magnetron sputtering under substrate bias conditions of 0, −60, −80, −100, −120, and −140 V. Then, high-overtone bulk acoustic resonator structures were fabricated to estimate the shear mode electromechanical coupling coefficients k 15 2 of the ZnO films. The k 15 2 value reached its maximum at a bias voltage of −80 V, measuring 3.3% at approximately 500 MHz. This was 1.4 times the value when the bias voltage was 0 V. In addition, applying the bias voltage improved the crystal orientation of ZnO, which is expected to excite shear waves at higher frequencies.
No takes yet. Share an insight, caveat, or question.
Yoshida et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: