Answers are grounded in this paper and cite their sources.
A recently proposed type of gasification (Type IV) has a potential to produce syngas from biomass or lignite at chemical energy recovery over 96% on an LHV basis with H2O/C and O2/C molar ratios as small as 0.5 and 0.2, respectively. This type of gasification converts biomass or lignite in a sequence of pyrolysis, gas-phase partial oxidation of volatiles, and simultaneous steam gasification of char and steam reforming of the volatiles under catalysis of potassium. The present authors experimentally simulated a Type IV gasification of woody biomass loaded with 1.5 wt % K in a laboratory-scale continuous reactor system. The pyrolysis at 550 °C in a screw conveyer reactor and the subsequent steam gasification/reforming at 700–720 °C in the bed of K-loaded char demonstrated steady-state carbon conversion over 99%, residual tar concentration in the syngas well below 100 mg/m3N-dry, and CH4 concentration below 3 vol %-dry simultaneously. The potassium retained by the char catalyzed the steam reforming/gasification, consuming externally added steam and in situ formed one from the pyrolysis and partial oxidation at consumption more than 0.7 mol H2O/mol C. The composition of syngas reached near-equilibrium among H2, steam, CO, and CO2 at 700–720 °C. This was caused by fast reactions within the bed of the K-loaded char; steam reforming/gasification forming CO2/H2 and reverse water–gas shift reaction.
No takes yet. Share an insight, caveat, or question.
Oike et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: