Electrochemical performance of graphene oxide synthesized from graphitic spent potlining for energy storage application

The hazardous nature of spent pot lining (SPL) generated from aluminum smelters poses environmental challenges due to its high fluoride and cyanide content. However, techniques and recent studies have shown that SPL can be converted into valuable carbon-based materials through innovative recycling with potential applications in energy storage devices. This work presents an electrochemical performance evaluation of graphene oxide (GO) electrodes derived from acid-treated SPL for supercapacitor applications. The SPL-derived graphene oxide (SPL-GO) was synthesized via a facile and scalable improved Tour method. SPL-GO electrodes were fabricated by drip-coating SPL-GO/PVDF/DMF suspension on nickel foams. The morphology, structure, and chemical composition of the SPL-GO were characterized using advanced techniques such as energy dispersive X-ray (EDX) spectroscopy, scanning electron microscopy (SEM), Fourier transforms infrared (FTIR) spectroscopy, Raman spectroscopy, and X-ray diffraction (XRD). The electrochemical properties of the SPL-GO in 3 M KOH were characterized with a three-electrode system using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS) measurements. The results demonstrate that SPL-GO exhibits a relatively high specific capacitance of 762.90 F/g at 1 A/g with corresponding power and energy densities of 502 W/kg and 106.60 Wh/kg, respectively. Additionally, excellent cycling stability of 85.4 % was achieved after 10,000 cycles with a coulombic efficiency of 95.23 %. These results suggest a superior rate capability of SPL-GO, rendering it a viable candidate for supercapacitor applications. Furthermore, this work sets the foundation for the sustainable use of industrial waste in energy storage devices, suggesting a novel, eco-friendly material for practical supercapacitor applications. • Graphene oxide is derived from spent potlining after acid treatment. • Presence of hydroxyl and carbonyl functional groups confirms energy storage efficiency. • SPL-GO exhibits enhanced electrochemical performance. • Capacitance retention of 85.4% after 10000 charging and discharging cycles • SPL-GO electrode fabrication from hazardous SPL reduces environmental pollution.