Experimental Investigation of Printing Parameters in SLA 3D Printing of Plant-Based Resin Using Taguchi Method: Effects on Tensile Properties and Fracture Surface Morphology

This research utilizes stereolithography (SLA) technology to analyze the mechanical properties of the fabricated parts. SLA operates by precisely hardening liquid resin layer by layer with a focused ultraviolet (UV) light, enabling the creation of precise shapes and intricate details. Plant-based resins are becoming increasingly popular as alternatives to conventional polymer resins. However, the mechanical performance of SLA-printed parts made from bio-based materials can vary significantly depending on the printing parameters. To achieve acceptable performance, the optimization of the printing parameters is crucial. This study investigates the impact of print parameters on the mechanical and morphological characteristics through the use of L27 Taguchi’s orthogonal array. For this purpose, a combination of the most influential controlled parameters, including layer thickness, exposure time, bottom layer count, bottom exposure time, lifting distance, lifting speed, and print orientation, was assessed. The mechanical properties of the samples were evaluated after washing and UV curing. The optimal parameter combination was identified using the signal-to-noise (S/N) ratio, and analysis of variance (ANOVA) identified the significant parameters affecting the mechanical properties. The findings confirmed by the morphology analysis revealed that layer thickness, followed by bottom exposure time and exposure time, strongly influenced interlayer bonding and mechanical performance.