Answers are grounded in this paper and cite their sources.
BACKGROUND: Oversimplified pulmonary nodule phantoms limit the clinical translation of computed tomography (CT) research. Therefore, we manufactured and preliminarily validated patient-realistic part-solid nodule models with heterogeneous radiodensities using a stereolithography apparatus (SLA) benchtop three-dimensional (3D) printing. MATERIALS AND METHODS: goodness-of-fit testing. RESULTS: = 136.13; p = 1.864e-31; 5% confidence level) against readers reliably distinguishing patient nodules from our 3D-printed models. Average accuracy across all radiologists was 53.5%. Moreover, 47.5% of the 3D-printed nodules were incorrectly classified as real nodules. CONCLUSION: Our SLA 3D-printing workflow produces patient-realistic part-solid pulmonary nodules that are more cost-effective than commercially available counterparts. This methodology could provide customisable ground truth phantom models for CT imaging studies, including software validation, acquisition and reconstruction parameter optimisation and/or image quality evaluation. RELEVANCE STATEMENT: This study marks the first successful application of SLA 3D-printing to manufacture part-solid pulmonary nodule phantoms, incorporating multiple radiodensities and mimicking patient-realistic morphologies. Our developed methodology offers potential to 3D-printed phantoms with higher degrees of customisation and adaptation to research-specific objectives in CT imaging compared to commercially available standardised phantoms. KEY POINTS: Part-solid pulmonary nodule phantoms with patient-realistic morphologies and multiple radiodensities were manufactured using benchtop SLA 3D-printing. Clinical relevance of our 3D-printed nodules is demonstrated and statistically substantiated in a multicentre, single-blinded reader study including seventeen reading radiologists. Our methodology renders pulmonary nodule models that overcome limitations of generic, standardised, commercially available phantoms, often lacking complexity and realism. Manufactured nodule phantoms can provide an absolute ground truth for software training and validation, CT protocol optimisation and (image) quality assurance. Our modified 3D-printing method is readily available to other groups and can be customised to specific research applications.
No takes yet. Share an insight, caveat, or question.
Dhondt et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: