A detective quantum efficiency for spectroscopic X‐ray imaging detectors

PURPOSE: Spectroscopic X-ray detectors (SXDs) are under development for X-ray imaging applications. Recent efforts to extend the detective quantum efficiency (DQE) to SXDs impose a barrier to experimentation and/or do not provide a task-independent measure of detector performance. The purpose of this article is to define a task-independent DQE for SXDs that can be measured using a modest extension of established DQE-metrology methods. METHODS: We defined a task-independent spectroscopic DQE and performed a simulation study to determine the relationship between the zero-frequency DQE and the ideal-observer signal-to-noise ratio (SNR) of low-frequency soft-tissue, bone, iodine, and gadolinium signals. In our simulations, we used calibrated models of the spatioenergetic response of cadmium telluride (CdTe) and cadmium-zinc-telluride (CdZnTe) SXDs. We also measured the zero-frequency DQE of a CdTe detector with two energy bins and of a CdZnTe detector with up to six energy bins for an RQA9 spectrum and compared with model predictions. RESULTS: 0.02 which is within 5% of the theoretical value. CONCLUSIONS: The spectroscopic DQE defined here is (1) task-independent, (2) can be measured using a modest extension of existing DQE-metrology methods, and (3) is predictive of the ideal-observer SNR of soft-tissue, bone, iodine, and gadolinium signals. For CT applications, the combination of CS and electronic noise in CdZnTe spectroscopic detectors will degrade the zero-frequency DQE by 10 %-20 % depending on the electronic noise level and pixel size.