This is the authors' abstract. We don't add key points for this paper.
Understanding the origins of power loss in superconducting interconnects is essential for the energy efficiency and scalability of superconducting digital logic. At microwave frequencies, power dissipates in both the dielectrics and superconducting wires, and these losses can be of comparable magnitude. A novel method to accurately disentangle such losses by exploiting their frequency dependence using a multi-mode transmission line resonator, supported by a geometric factor concept and a 3D superconductor finite element method (FEM) modeling, is described. Using the method we optimized a planarized fabrication process of reciprocal quantum logic (RQL) for the interconnect loss at 4.2 K and GHz frequencies. The interconnects are composed of niobium (Nb) insulated by silicon dioxide made with a tetraethyl orthosilicate precursor (TEOS-SiO₂). Two process generations use damascene fabrication, and the third one uses Cloisonné fabrication. For all three, TEOS-SiO₂ exhibits a dielectric loss tangent tan δ= 0.0012 ± 0.0001, independent of Nb wire width over $0.25 - 4 \: μm$. The Nb loss varies with both the processing and the wire width. For damascene fabrication, scanning transmission electron microscopy (STEM) and energy dispersive X-ray spectroscopy (EDS) reveal that Nb oxide and Nb grain growth orientation increase the loss above the Bardeen Cooper Schrieffer (BCS) minimum theoretical resistance R BCS. For Cloisonné fabrication, the $0.25 \: μm$ wide Nb wires exhibit an intrinsic resistance Rₛ = 13 ± 1.4 \: μΩ at 10 GHz, which is below RBCS ≈ 17 \: μΩ. That is arguably the lowest resistive loss reported for Nb.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Garcia et al. (2023) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: