This is the authors' abstract. We don't add key points for this paper.
A novel methodology for integrating a fuel cell stack with a medium-voltage grid is presented in this paper. Instead of relying on a conventional inverter and step-up transformer, the proposed system employs a high-frequency magnetic link and a multilevel cascaded medium-voltage converter to interface a proton exchange membrane fuel cell (PEMFC) directly with the AC distribution grid. The proposed research details the design, analytical modeling, and performance evaluation of the converters when integrated into a grid-connected fuel cell setup, as well as the control scheme developed to regulate power transfer to the grid. The feasibility of the proposed work was demonstrated through simulations on a 1 MW PEMFC system, inclusive of the control system demonstrating optimized performance, connected to an 11 kV grid within the MATLAB/Simulink environment. Supplementary to the simulations, a 400 W experimental prototype was built and tested in the laboratory environment. • Fuel cell connects to the MV grid through HFML and a multilevel converter. • Validated performance of 1 MW PEMFC simulation and 400 W prototype. • The dual-loop PI control kept the 2050 V DC link stable. • Regulated active power flow to the grid ranged from 0.25 MW to 1 MW. • The current THD of 2.58 % complies with IEEE standards and grid code compliance.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Makineni et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: