Answers are grounded in this paper and cite their sources.
Explores cogging torque reduction in permanent magnet synchronous machines, suggesting a new design criterion for optimal performance.
Cogging torque is a key performance of permanent magnet synchronous machines (PMSMs) as a dominated component of torque pulsation and speed ripple. Its reduction has attracted considerable attention for the stable operation of machine propeller systems in electrified underwater propulsion applications. For a PMSM with Q s stator slots and p rotor pole pairs, additional (2 mp ) th ( m = 1, 2, …) harmonics inherently exist in the resultant cogging torque. Normally, these harmonics are mainly caused by unavoidable manufacturing tolerances of stator, and therefore, it is a challenge to reduce them during design stage. In this paper, the generation mechanism of (2 mp ) th cogging torque harmonics is first investigated, and a theoretical relationship between the squared magnetomotive force (MMF) harmonics due to PMs and the cogging torque harmonics is established. Secondly, an optimal pole number selection criterion is proposed to reduce the (2 mp ) th cogging torque harmonics induced by nonideal permeance harmonics. The results indicate that a smaller pole number leads to the lower amplitudes of (2 mp ) th cogging torque harmonics, which contrasts with the conventional slot–pole combination strategies aiming at minimising an ideal cogging torque. The effectiveness of the proposed selection criterion is verified by finite element (FE) simulation. Finally, three rotors with different pole numbers, that is, p = 10, 14 and 16, are built and assembled with a common 12‐slot stator. The experimental results of cogging torque of each PMSM validate the proposed method.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: