Answers are grounded in this paper and cite their sources.
The wetting and the self-cleaning properties (the latter is often called the "Lotus-Effect") of three types of superhydrophobic surfaces have been investigated: silicon wafer specimens with different regular arrays of spikes hydrophobized by chemical treatment, replicates of water-repellent leaves of plants, and commercially available metal foils which were additionally hydrophobized by means of a fluorinated agent. Water droplets rolled off easily from those silicon samples which had a microstructure consisting of rather slender spikes with narrow pitches. Such samples could be cleaned almost completely from artificial particulate contaminations by a fog consisting of water droplets (diameter range, 8-20 microm). Some metal foils and some replicates had two levels of roughening. Because of this, a complete removal of all particles was not possible using artificial fog. However, water drops with some amount of kinetic impact energy were able to clean these surfaces perfectly. A substrate where pronounced structures in the range below 5 microm were lacking could not be cleaned by means of fog because this treatment resulted in a continuous water film on the samples.
No takes yet. Share an insight, caveat, or question.
Fürstner et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: