Answers are grounded in this paper and cite their sources.
• High-Cr alloy is more effective against sulfate induced hot corrosion. • High-Cr alloy did not show better corrosion resistance when sulfate and chloride salts were co-deposited. • α-Al 2 O 3 can easily form during low-temperature hot corrosion process. The corrosion behavior of Super304H, HR3C and related aluminized coatings under K 2 SO 4 + Na 2 SO 4 (mass ratio =1: 1) and K 2 SO 4 + Na 2 SO 4 + KCl (45: 45: 10) deposits in a mixed gas of 0.5SO 2 -4O 2 -20H 2 O-75.5CO 2 (vol.%) at 700°C were studied. Super304H undergoes severe corrosion under both deposits, the addition of KCl did not significantly accelerate the corrosion process but resulted in an extremely porous and thickness-doubled scale. While HR3C with higher Cr content shows excellent corrosion resistance in Cl free environment due to the formation of dense Cr 2 O 3 . Due to the involvement of Cl, HR3C can no longer resist the corrosion of the salts. The corrosion depth increases by two orders of magnitude and becomes as severe as Super304H. Aluminizing significantly improved the corrosion resistance of the alloys on account of α -Al 2 O 3 formation by a new mechanism. The addition of KCl had little effect on this mechanism and only increased the thickness of the corrosion products slightly.
No takes yet. Share an insight, caveat, or question.
Yu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: