Answers are grounded in this paper and cite their sources.
Friction stir welding of titanium alloy (Ti–6Al–4V) was demonstrated on 3, 6, 9 and 12 mm thickness square groove butt joints. Complete microstructural and microhardness evaluations were conducted in addition to surface and subsurface examinations for each case. The 3 mm welds exhibited an extremely fine grained microstructure with evidence of processing temperatures below the beta transus temperature of the alloy. The 6, 9 and 12 mm samples possessed larger grains formed by a slower cooling rate from above the beta transus temperatures. The thick section weld exhibited a nearly uniform microhardness, while the thinner welds showed a slight, 6%, increase in hardness compared with the parent material.
No takes yet. Share an insight, caveat, or question.
Edwards et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: