Creep deformation and rupture behavior of 9Cr-ODS steel cladding tube at high temperatures from 700°C to 1000°C

ABSTRACTThe Japan Atomic Energy Agency has been developing 9Cr-oxide dispersion strengthened (ODS) steel as a fuel cladding material for sodium-cooled fast reactors (SFRs). Previous studies have formulated the creep rupture equation for 650°C–850°C. However, little data have been obtained above 850°C, and no equation has been formulated. This study conducted creep tests to evaluate creep strength at 700°C–1000°C. Two creep test methods, the internal pressure and ring creep tests under development, were used, and the validation of the ring creep test method was conducted. The results showed that 9Cr-ODS steel undergoes almost no strength change due to the matrix's phase transformation, and a single equation can express a creep rupture strength from 700°C to 1000°C. In validating the ring creep test method, analysis clarified the effect of stress concentration on the specimen. Plastic deformation occurs at high initial stress and may lead to early rupture. The results will be essential for future creep testing and evaluation of neutron-irradiated 9Cr-ODS steel.KEYWORDS: Oxide dispersion strengthened steelfuel cladding tube,creep strengthcreep straininternal creep testring creep testDisclaimerAs a service to authors and researchers we are providing this version of an accepted manuscript (AM). Copyediting, typesetting, and review of the resulting proofs will be undertaken on this manuscript before final publication of the Version of Record (VoR). During production and pre-press, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal relate to these versions also. AcknowledgmentsThe authors would like to express their sincere gratitude to Dr. Tomoyuki Uwaba for his valuable guidance on finite element simulation.Additional informationFundingMEXT Innovative Nuclear Research and Development Program Grant Number JPMXD0219214482, Ministry of Education Culture, Sports, Science, and Technology, supported this work.