Answers are grounded in this paper and cite their sources.
Carbon fibre reinforced cement-based sensors offer a potential low-cost and high-performance alternative to externally applied sensors for health monitoring of concrete structures. This paper focuses on the moisture dependence of bulk conductivity for carbon fibre reinforced cement-based sensors with fibre contents 0.1–1.5 vol%. Under two-point AC impedance spectroscopy at frequencies 1 Hz–10 MHz, the electrode polarization (EP) process, an electrical double layer polarization process (EDLP), and the bulk Maxwell-Wagner type interfacial polarization process (MWP) were identified. While reducing the saturation degree from 100 % to 0 %, the fractional change of bulk conductivity (FCS) underwent three different stages, which consists of a non-linear stage at 100–80 % saturation, a linear stage at 80–20 % saturation, and a final stage at 20–0 % saturation. The results gave insights into the stability of cement-based sensors under field conditions, and the underlying mechanisms of behaviour. From this, a route towards appropriate use of cement-based sensors in mechanical sensing and potentially moisture sensing without further external measures can be realised.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: