Answers are grounded in this paper and cite their sources.
A novel optical emission spectroscopy (OES) technique for the determination of electron temperatures and densities in low-pressure argon discharges is compared with Thomson scattering (TS). The emission spectroscopy technique is based on the measurement of certain line ratios in argon and a collisional‐radiative model (CRM) including metastable transport. The investigations are carried out in a planar inductively coupled neutral loop discharge (NLD) over a wide range of pressures, p = 0.05Pa‐5Pa. This discharge is a weakly magnetized novel radio-frequency (rf) plasma source, proposed for plasma etching. The NLD is operated in pure argon at a frequency of f = 13.56MHz and powers varied between P = 1kW and 2kW. Both diagnostics, OES and TS, are applied in parallel. The electron energy distribution functions obtained by TS are clearly Maxwellian at low pressures but exhibit a certain enhancement of the energetic tail at higher pressures. Electron densities and temperatures obtained by both diagnostic techniques are compared. Further, absolute numbers of the metastable densities derived from the measurement by the CRM are compared with earlier measurements under similar conditions. Excellent agreement is found throughout if depletion of the neutral gas density by increasing gas temperature and electron pressure is included in the CRM. Electron pressure is the dominant depletion mechanism at gas pressures p 0.1Pa and rf powers P> 1kW. There, the electron pressure exceeds more than 3 times the neutral pressure and the ionization degree approaches 7% while at pressures p> 1Pa the degree of ionization is relatively low (<10 −3 ) and neutral gas depletion is dominated by gas heating. (Some figures in this article are in colour only in the electronic version)
No takes yet. Share an insight, caveat, or question.
Crintea et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: