Answers are grounded in this paper and cite their sources.
rf-PECVD 방법에 의해서 <TEX>CH₄+H₂</TEX> 혼합가스를 이용Si-웨이퍼 위에 DLC 박막을 증착할 때, 이산화탄소나 질소 등 보조가스가 증착된 박막의 결합구조와 기계적 특성에 미치는 영향을 고찰하였다. DLC 박막의 증착속도는 rf-power가 증가함에 따라서 증가하지만, 보조가스의 양이 증가함에 따라서는 감소하였다. 또한, 이산화탄소(<TEX>CO₂</TEX>) 가스가 증가함에 따라 박막내 수소 함량은 감소하였으나, <TEX>sp³/sp²</TEX> 결합 비는 증가하였다. 질소(<TEX>N₂</TEX>) 가스가 증가하는 경우는 수소 함량은 감소하였으나, <TEX>sp³/sp²</TEX> 결합비 변화에 있어 경향성은 보이지 않는 것으로 확인되었다. In this work, we were investigated the effect of the additive gases on the relationship between bonding structure and mechanical properties of the deposited films when the DLC films were deposited on Si-wafer by the rf-PECVD method with the addition of small amounts of carbon dioxide and nitrogen to the mixture gas of methane and hydrogen. The deposition rate of the films increased as the rf-power increased, while it decreased with increasing the amount of additive gases. Also, as the carbon dioxide gas increased, the hydrogen content in the films decreased but the <TEX>sp³/sp²</TEX> ratio of the films increased. In case of nitrogen gas, the hydrogen content decreased, however the <TEX>sp³/sp²</TEX> ratio and nitrogen gas flow rate did not show a specific tendency.
No takes yet. Share an insight, caveat, or question.
Bong-Geun Choi (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: