Wire Arc Additive Manufacturing (WAAM) is a cost-effective and scalable technique for producing large metallic components; however, coarse columnar microstructures, strong crystallographic texture, and significant residual stresses limit its widespread adoption. Hybrid WAAM processes that integrate deformation-based techniques have been developed to address these limitations. This review provides an analysis of deformation-assisted WAAM, covering interlayer rolling, friction stir processing (FSP), machine hammer peening, laser shock peening, and ultrasonic-vibration-assisted techniques. These hybrid techniques introduce additional thermomechanical parameters (strain, strain rate, and applied stress) that significantly influence microstructure evolution. The governing physical metallurgy mechanisms are discussed in detail, including dislocation accumulation, recovery, static and dynamic recrystallization, and severe plastic deformation. Studies from 2022 to 2025 are critically reviewed, highlighting the effectiveness of hybrid WAAM in promoting columnar-to-equiaxed grain transformation, reducing anisotropy, mitigating defects, and improving mechanical properties across aluminum, titanium, steels, and nickel-based alloys. The integration of auxiliary processes such as in situ machining and heat treatment is also discussed. This review establishes a process–structure–property framework for hybrid WAAM and provides guidance for the development of advanced additive manufacturing systems for the production of near-net-shape components, with reported yield-strength gains of 20–40%, elongation gains of 10–30%, and fatigue-life improvements of up to 60% relative to as-built WAAM.
Elalem et al. (Mon,) studied this question.