This is the authors' abstract. We don't add key points for this paper.
One of the pathways to attain NET ZERO is CO2 injection into deep saline aquifers (DSAs), which alters the saturation and pore pressure of the reservoir rocks, hence the effective stress, σʹ. This, in turn, would change their geomechanical (i.e. peak deviatoric stress, elastic modulus, Poisson's ratio) and petrophysical (porosity and permeability) properties. Such a situation might trigger geo-hazards, like induced seismicity, ground deformation, caprock failure. Hence, reducing the risk of such hazards necessitates quantifying the spatial and temporal changes in σʹ, under specific CO2 and/or brine saturation, designated as SCO2 and Sb, respectively, and resultant pore pressure. With this in view, a conceptual model depicting the reservoir, demarcated by five zones based on variations in saturation, pore-pressure, temperature, etc., and the corresponding effective stress equations have been proposed based on the available literature. Furthermore, a critical review of literature has been carried out to decipher the limitations and contradictions associated with the findings from (i) laboratory studies to estimate SCO2 employing p-wave velocity and electrical resistivity, (ii) analytical and numerical approaches for estimating the variation of pore-pressure in the reservoir rocks, and (iii) laboratory studies on variation in geomechanical and petrophysical properties under the conditions representative of the above-mentioned zones of the conceptual model. The authors consider that extensive experiments should be conducted on the rocks from different sources and tested under various conditions of the CO2 injection to validate the proposed model for the execution of risk-free CO2 storage in DSAs.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Narayanan et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: