Key points are not available for this paper at this time.
A method is described for utilizing normal absorption coefficient or acoustic impedance measurements to predict reverberant sound absorption coefficients. The average of coefficients for the six standard frequencies determined from acoustic impedance measurements agrees closely with the average reverberant coefficient, for cases where the material may be said to obey the normal impedance assumption. The normal absorption coefficients of some 26 different acoustic materials were measured at 512 c.p.s Using the method given in the paper, the predicted reverberant coefficient deviated from the measured reverberant coefficient by 0.05 or less for 18 materials, while in only 3 cases were the deviations greater than 0.10. The method should be particularly applicable to the problem of acceptance testing of installed acoustic materials. In the theoretical development, best agreement with experiment was obtained by introducing a new kind of reverberant statistics which associates with each wave packet in a random field a scalar quantity equal to the square of the absolute value of the sound pressure in each packet, instead of the customary energy flow treatment. Also, it was found necessary to carry out the analysis using a concept of equivalent real impedance to replace the usual complex impedance.
Albert London (Wed,) studied this question.