Answers are grounded in this paper and cite their sources.
This analysis demonstrates optimal particle sizes and concentrations that improve sealing in fractured formations, suggesting enhanced drilling efficiency.
Severe fluid loss in fractured formations poses a major technical challenge in deep oil and gas drilling, significantly constraining wellbore integrity and drilling efficiency. This study establishes a comprehensive multi-scale research system combining indoor experiments and CFD-DEM numerical simulations to investigate particle transport and sealing mechanisms. A dynamic sealing model incorporating the Di Felice drag force and modified JKR contact theory was innovatively developed to rigorously analyze multi-physics interactions, including van der Waals forces, electrostatic forces, and fluid shear under complex seepage conditions. Results demonstrate that for single-particle sealing, the optimal particle size is 1/2 to 2/3 of the fracture width, satisfying the one-third bridging theory. Among gradation schemes, a triple-particle distribution exhibits the highest pressure-bearing capacity, particularly when dominant particles comprise 70%–80% and the filling particle size ratio is 0.2–0.4. Furthermore, an optimal concentration window of 8% was identified; lower concentrations result in sealing failure, while higher concentrations cause false plugging due to jamming effects . Additionally, increasing drilling fluid viscosity to 50 mPa · s enhances sealing layer density, while an optimal fluid density of 1.4 g/cm 3 achieves a critical balance between particle accumulation efficiency and buoyancy. With experimental and simulation results agreeing within a 5% relative error, this research provides a robust theoretical basis for optimizing leak-stopping fluid formulations in fractured strata.
No takes yet. Share an insight, caveat, or question.
Deng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: