A Lightweight FFT-Domain Co-Channel Interference Detection Method for Narrowband Wireless Systems

Co-channel interference (CCI) remains a critical factor affecting link reliability in narrowband wireless systems, especially in scenarios with intensive frequency reuse, overlapping coverage, and dense terminal access. Existing interference detection methods are either computationally simple but insufficiently sensitive to short-term spectral variations, or highly accurate but dependent on labeled data and nontrivial inference resources. To address this issue, this paper proposes a lightweight CCI detection method in the FFT domain based on spectrum-jump analysis. The proposed method does not rely on absolute power growth as the primary interference indicator. Instead, it tracks the temporal inconsistency of dominant spectral-bin indices across consecutive FFT frames and converts recurrent peak-bin migration into an interference decision through a short-window counting mechanism. The method is computationally efficient, interpretable, and suitable for real-time deployment without offline model training. SDR-based measurements are combined with controlled repeated experiments to assess detector performance under varying signal-to-noise ratio (SNR), interference-to-signal ratio (ISR), carrier-frequency offset (CFO), multi-peak ambiguity, and two-path Rayleigh fading conditions. On the measured SDR record, the proposed method captures all interference-positive windows after the marked onset, while the controlled SNR/ISR experiments yield an overall detection probability of 96.0% over 250 CCI trials with no false alarms over 250 normal trials. ROC and precision–recall analyses further show that the selected threshold lies within a broad validation plateau. The results also reveal clear applicability boundaries: when the CFO approaches zero, when the interference is very weak, or when multiple stationary peaks have nearly equal power, dominant-bin migration may be weak or ambiguous. Therefore, the proposed approach is a low-complexity online detector for CCI cases that induce observable FFT-bin instability, and it can also serve as a front-end trigger for more advanced interference analysis modules.