Answers are grounded in this paper and cite their sources.
Abstract—This paper describes an integrated analog front-end for wireless powering and recharging of miniature Li-ion batteries used in implantable neural recording microsystems. DC signal extraction from a wireless carrier is accomplished using Schottky barrier contact diodes with lower forward voltage drop for improved efficiency. The battery charger employs a new control loop that relaxes comparator resolution requirements, provides simultaneous operation of constant-current and constant-voltage loops, and eliminates the external current sense resistor from the charging path. The accuracy of the endof-charge detection is primarily determined by the voltage drop across matched resistors and current-sources and the offset voltage of the sense comparator. Experimental results in 0.6μm bulk CMOS technology indicate that ±1.3 % (or ±20μA) end-ofcharge accuracy can be obtained under worst-case conditions for a comparator offset voltage of ±5mV. The circuits occupy 1.735mm 2 with a power dissipation of 8.4mW when delivering a load current of 1.5mA at 4.1V (or 6.15mW) for an efficiency of 73%. I.
No takes yet. Share an insight, caveat, or question.
Li et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: