Answers are grounded in this paper and cite their sources.
The sensing of a flame can be performed by using wide-bandgap semiconductors, which offer a high signal-to-noise ratio since they only response the ultraviolet emission in the flame. Diamond is a robust semiconductor with a wide-bandgap of 5.5 eV, exhibiting an intrinsic solar-blindness for deep-ultraviolet (DUV) detection. In this work, by using a submicron thick boron-doped diamond epilayer grown on a type-Ib diamond substrate, a Schottky photodiode device structure- based flame sensor is demonstrated. The photodiode exhibits extremely low dark current in both forward and reverse modes due to the holes depletion in the epilayer. The photodiode has a photoconductivity gain larger than 100 and a threshold wavelength of 330 nm in the forward bias mode. CO and OH emission bands with wavelengths shorter than 330 nm in a flame light are detected at a forward voltage of −10 V. An alcohol lamp flame in the distance of 250 mm is directly detected without a focusing lens of flame light.
No takes yet. Share an insight, caveat, or question.
Koide et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: