This is the authors' abstract. We don't add key points for this paper.
A burst-mode transmitter achieves 6 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$\,$</tex></formula> ns turn-on time by utilizing a fast frequency settling ring oscillator in digital multiplying delay-locked loop and a rapid on-off biasing scheme for current mode output driver. The resistor tuning-based ring oscillator avoids the use of bias voltages and thereby eliminates the related settling time overhead. The calibrated rapid on-off biasing circuit utilizes a fast charging technique to achieve bias voltage settling time of 4 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$\,$</tex></formula> ns, resulting in 30X improvement over a diode-connected bias circuit. Fabricated in 90 nm CMOS process, the prototype achieves 2.29 mW/Gb/s energy efficiency at peak data rate of 8 Gb/s. A 125X (8 Gb/s to 64 Mb/s) change in effective data rate results in 67X (18.29 mW to 0.27 mW) change in transmitter power consumption corresponding to only 2X (2.29 mW/Gb/s to 4.24 mW/Gb/s) degradation in energy efficiency for 32 byte long data bursts. We also present an analytical bit error rate (BER) computation technique for rapid on-off links, which uses MDLL settling measurement data in conjunction with always-on transmitter measurements. This technique indicates that the BER bathtub width for 10 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">⁻¹²</tex> </formula> BER is 0.65 UI and 0.72 UI during rapid on-off operation and always-on operation, respectively.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Talegaonkar et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: