Answers are grounded in this paper and cite their sources.
Results of numerical simulations of active flow control applied to an airfoil using the Reynoldsaveraged Navier-Stokes equations are presented. The simulations are first compared with the poststall separation control experiments of Seifert et al.1'12 on a NACA0015 at 1.2 x 106 chord Reynolds number. The jet is introduced tangential to the surface at the leading edge of the airfoil. The calculated lift increments are in good agreement with the experimental data. Two flow-control techniques for a NACA0012 airfoil at a chord Reynolds number of 8.5 x 10 6 are investigated. The first technique utilizes a small, 0.5% chord, steady jet, and the second method employs a synthetic jet of a similar scale. Performance benefits are obtained by placing the actuators very near the airfoil leading edge on the suction surface. A significant increase in lift (29%) is obtained using the synthetic jet actuator in the post-stall regime. At lower lift, the steady jet actuator significantly reduces drag by rotating the lift vector upstream.
No takes yet. Share an insight, caveat, or question.
Donovan et al. (1998) studied this question.
Synapse has enriched 9 related papers. Consider them for comparative context: