Answers are grounded in this paper and cite their sources.
The international roughness index (IRI) is typically obtained using an inertial profiler (IP) to measure pavement elevation. However, the IP has several limitations: it can only measure wheelpaths, requires a constant speed, and displays problems with reproducibility. To overcome these constraints, we developed an image-based roughness inspection system (IPRIS), capable of capturing pavement images at 1-m intervals at speeds of up to 100 km/h. Utilizing photogrammetry, IPRIS reconstructs image positions and orientations to generate three-dimensional (3D) point clouds, producing a high-resolution digital surface model (DSM) and orthophoto. This enables flexible profile selection on the orthophoto, allowing IRI calculations directly from DSM elevation data. To assess the accuracy of the IPRIS, we established a reference elevation profile using a high-precision total station and leveling and then compared the IPRIS with a terrestrial light detection and ranging system (TLS). Results showed that the IPRIS achieved IRI Class 1 specification, with an elevation standard deviation of approximately 1.2 mm and an IRI difference of less than 0.200 m/km. By contrast, the TLS exhibited significant point cloud noise, creating a two-fold increase in elevation errors compared to the IPRIS and an IRI difference of 0.419 m/km, meeting only IRI Class 2 specification. Furthermore, repeated IPRIS data collection on a highway yielded consistent results, demonstrating its reliability for high-speed IRI inspections. However, a key limitation of the IPRIS is its reliance on clear pavement images for 3D reconstruction, making it unsuitable for nighttime or rainy conditions.
No takes yet. Share an insight, caveat, or question.
Chang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: