Key points are not available for this paper at this time.
In this paper, we present the results of a comprehensive acoustic monitoring and modeling study of the composite underwater noise footprint of an exploration drilling project in shallow waters (46 m) in the northeastern Chukchi Sea. Measured acoustic source levels of multiple vessels and drilling equipment were used as inputs to theoretical propagation models. The models generated time-dependent wide-area noise fields, accounting for oceanographic and weather conditions and the time-dependent drilling activities and positions of multiple vessels. Modeling in increments of 1 h was performed over the full operations period, from July 7, 2015 to October 16, 2015. Model validation was carried out by comparing simulated results with high-resolution acoustic data acquired at multiple stations in the area. The study shows that noise radiating from up to 19 supporting vessels is usually dominant, but noise from certain drilling-related activities occasionally rises above vessel noise within a radius of 8 km from drill sites, limited to a few hours in durations. Modeled scenarios show that by constraining vessel positions to within a few kilometers of the drilling location, the extent of the 120 dB re 1 μPa noise footprint, as defined for single-well and concurrent double-well drilling operations, is contained within a nominal radius of 20 km. Broadband noise from drilling platforms and support vessels reached wind-generated ambient noise levels at ranges between 60 and 85 km from the drill site. Still, some tones and narrowband sounds may remain above the natural ambient noise at the same frequencies to longer ranges.
Quijano et al. (Wed,) studied this question.