Mechanical Behavior of Carbon Fiber Textile-Reinforced Engineered Cementitious Composite Under Off-Axis Tension: Experimental and Theoretical Investigation

Carbon fiber textile-reinforced engineered cementitious composite (CTR-ECC) is widely utilized in structural strengthening applications due to its advantages of low weight and high strength. A comprehensive understanding of its mechanical behavior under off-axis tension is crucial for addressing the prevalent off-axis stress states in engineering practice. This paper presents an experimental investigation on the off-axis tensile properties of CTR-ECC. Specimens were fabricated with four off-axis angles: 0°, 15°, 30°, and 45°. The study revealed three main findings: (1) Under axial (0°) loading, failure is characterized by yarn fracture and interface slip, whereas off-axis tension induces a stable progressive delamination failure in textile-reinforced ECC systems. (2) While CTR-ECC exhibits higher tensile strength than plain ECC at all angles, its strength decreases significantly as the off-axis angle increases (e.g., a 27.1% reduction at 15°). Off-axis layouts, however, substantially improve energy absorption, with strain energy density increasing by up to 368.4% at 30°. (3) A phenomenological constitutive model was developed, which can adequately capture the stress–strain response of CTR-ECC under various off-axis angles, with coefficients of determination (R2) exceeding 0.9 in all cases. These results provide important insights into the failure mechanisms and performance design of CTR-ECC under off-axis tension conditions.