Answers are grounded in this paper and cite their sources.
Historically, controlled shear rate instruments have been used to determine the rheology of fluids used in the oil field. Construction of controlled shear instruments is easier, and the electronics to control the instruments are readily available. In the last few years, technological advances in electric motor design have made it possible to build a controlled stress instrument which is both accurate and easy to use. Particle settling is one example of a stress controlled process that is found in the oil field. Measurements made with controlled shear rate instruments have not been particularly successful in predicting particle settling behavior. Controlled stress measurements have been shown to be a better measure of fluid properties for the prediction of particle settling. Yield stress measurements are another area where controlled shear rate instruments are difficult to use. In a controlled stress instrument, a stress is placed on the fluid and the resulting displacement is measured. Small stresses can be applied in a stepwise fashion resulting in accurate determinations of yield points. This paper covers the aspects of controlled stress rheological measurements and gives several examples of the use of these measurements in the evaluation of oil field fluids. Applications to polymer solutions and fracturing fluids will be discussed.
No takes yet. Share an insight, caveat, or question.
Peter E. Clark (1989) studied this question.