Answers are grounded in this paper and cite their sources.
Investigates pH influence on sulfur selectivity in sulfide-oxidizing bacteria processes, indicating design improvements needed.
Biological desulfurization, utilizing sulfide-oxidizing bacteria (SOB) to convert hydrogen sulfide (H 2 S) in gas into elemental sulfur, has been implemented at a large scale since the 1990s. The recent addition of a sulfidic bioreactor between the absorber column and micro-oxic bioreactor in the process line-up has increased the selectivity for sulfur production. However, when applied for gas streams with a low carbon dioxide to H 2 S ratio (i.e., high pH conditions), the sulfur selectivity was found to decrease while the biological uptake of sulfide in the sulfidic bioreactor increased, hypothesized to be related to polysulfide (S x 2− ). This study investigated the effect of pH on the total S x 2− concentration, total uptake of (poly)sulfide, and internal cell-bound sulfane to elucidate the influence on sulfur selectivity in the process line-ups with and without a sulfidic bioreactor. Total S x 2− concentration increased from ∼1.5 mmol-S L −1 at pH 8.5 to ∼5.0 mmol-S L −1 at pH ∼9.3 in the sulfidic reactor. The maximum biological absolute (poly)sulfide uptake of ∼72% and the maximum internal cell-bound sulfane (0.05 ± 0.01 mg-S mg-N −1 ) were obtained in the line-up with the sulfidic bioreactor at pH ∼9.3. However, the dual-reactor process at pH ∼9.3 had the lowest sulfur selectivity (44.1% ± 28.7%) and highest thiosulfate selectivity (53.7% ± 28.4%), indicating increased chemical oxidation of S x 2− . This study provides insight into (poly)sulfide-SOB interactions, the influence these interactions have on sulfur selectivity, and the implications for the design of new processing schemes.
No takes yet. Share an insight, caveat, or question.
Johnston et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: