Recycling of Dental Zirconia into CAD/CAM Systems for Potential Industrial Applications

This study proposes the development of a recycling process for the reintegration of dental zirconia waste into CAD/CAM systems for rapid prototyping, with the objective of demonstrating the feasibility of manufacturing functional products from recycled zirconia obtained from a commercial dental laboratory. The proposed methodology aims to explore a simple and economically viable process, which involves the purification and processing of a heterogeneous zirconia powder, followed by the fabrication of pre-sintered blocks suitable for CAD/CAM applications. The recycled bulk ceramic was characterized and compared with commercial zirconia through density measurements, X-ray diffraction, scanning electron microscopy, Vickers hardness, flexural strength testing, and sintering shrinkage analysis. The results indicated that, although recycled zirconia exhibits lower property values than the commercial reference material, it retains adequate characteristics for specific practical applications. Consequently, to demonstrate industrial feasibility, four components were designed using CAD and machined using CAM from the recycled blocks, simulating a rapid prototyping process. The fabricated components exhibited a smooth and flawless surface, were mechanically robust and solid to the touch, and showed well-defined contours with sharp edges. Dimensional analysis demonstrated high accuracy, with an average percentage error of 0.53% ± 0.14. These findings demonstrate that high-value ceramic waste can be reintegrated into the production chain as functional industrial components through a process that is closely aligned with the real conditions of industrial recycling, while also mitigating environmental contamination from hazardous industrial waste.