Answers are grounded in this paper and cite their sources.
Background The measurement of computed tomography dose index 100 (), which is feasible only through axial scanning, requires that the clinical spiral protocols be replaced with those for axial scanning. The real‐time ionization chamber detects the integral of radiation dose rate profile, enabling the direct verification of the volume CTDI on spiral CT scanning (). Purpose This study aimed to develop a direct measurement technique for and compare its accuracy with that measured using axial scanning () or that displayed on the console (). Methods A CTDI phantom with a real‐time ionization chamber was placed on the headrest or examination table. was measured with following parameters: tube voltage = 120 kV, effective mAs = 100, and rotation time = 1.00 s. The parameters for measuring were set identical to those used for axial scanning, except for rotation times = 0.33, 0.50, and 1.00, pitch = 0.35, 0.50, 0.75, 1.00, 1.25, and 1.50, and the scanning range = 15 cm. was extracted from the integral of radiation dose rate profile. was subsequently calculated and compared with and . Finally, was measured for 10 clinical protocols and compared with . Results The differences between and , and , and and for the head and body phantoms were all < −2.0%. The differences between and for scans on clinical protocols with and without automatic exposure control were < 11.9% and < 10.5%, respectively; these large differences were observed in the dual‐energy twin‐beam protocol. Excluding this protocol yielded differences between the measurements with and without automatic exposure control of < 2.0% and < −3.9%, respectively. Conclusions The results showed an excellent agreement between and , supporting the use of the clinical spiral CT scanning to verify using a real‐time ionization chamber.
No takes yet. Share an insight, caveat, or question.
Fukuda et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: