Finite Element Simulation and Experimental Validation of Induction Heating Coil Design for TiAl Blade

To improve temperature uniformity and reduce thermal stress-induced cracking during laser directed energy deposition (laser DED) repair of TiAl blades, this study proposes a refined induction heating coil design based on coupled electromagnetic-thermal finite element simulation. A temperature-dependent model of the induction heating process for a cast 45XD TiAl blade was established and used to compare circular and elliptical coil cross-sectional shapes. The elliptical coil reduced the magnetic field concentration at the leading and trailing edges and decreased the maximum temperature difference across the blade cross-section to below 100 K, thereby improving transverse temperature uniformity. To further improve the temperature distribution along the blade length, a variable-pitch solenoid coil with sparse turns in the middle and dense turns near both ends was designed. This arrangement improved the balance between local heat generation and heat dissipation and reduced the temperature variation within the central 10 cm region of the blade to about 10 K. Experimental validation showed engineering-level agreement with the simulation results, and the blade body was stably maintained at 1020–1030 K, satisfying the preheating requirement for laser DED repair of TiAl blades within the tested design set.