Answers are grounded in this paper and cite their sources.
Investigates surface quality and grinding efficiency in steel using a novel grinding technique, suggesting improved outcomes.
Path-controlled intermittent grinding (PCIG) is introduced as a novel toolpath-controlled grinding strategy in which wheel–workpiece engagement is governed by a programmed periodic wheel-center trajectory. In contrast to conventional grinding or intermittent methods based on structured grinding wheels, engagement and disengagement phases are created purely through machine kinematics. Consequently, material removal is governed by the imposed trajectory rather than by static machine parameters alone, enabling deterministic control of the temporal structure of grinding engagement without modifying the grinding tool. A kinematic–numerical model is developed to describe the wheel-center motion, grain-level trajectories, and surface generation mechanism, allowing prediction of intermittent engagement conditions, contact length variations, and the resulting evolution of the specific material removal rate. The concept is validated experimentally through deep surface-grinding tests on hardened 100Cr6 steel by comparing PCIG with conventional grinding under identical cycle-averaged productivity. The results demonstrate that the intermittent process produces burn-free surfaces with stable surface roughness while significantly reducing average tangential grinding forces. By concentrating material removal into short engagement intervals separated by explicit non-contact phases, the proposed strategy reduces effective contact duration and associated thermal loading, while facilitating coolant access to the grinding zone while maintaining overall process productivity.
No takes yet. Share an insight, caveat, or question.
Paknejad et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: