Answers are grounded in this paper and cite their sources.
Numerical investigation shows enhanced heat transfer in molten salt with helical tubes, indicating more efficient reactor designs.
BackgroundThe Helically Coiled Heat Exchanger (HCHX) offers advantages including high heat transfer efficiency, compactness, high-pressure resistance, and reduced fouling tendency, making it well-suited to meet the requirements of modular Molten Salt Reactors (MSRs) for heat exchangers. Its heat transfer performance and pressure drop directly impact the reactor's thermal efficiency and safety, rendering research on its heat transfer and flow resistance characteristics highly significant.PurposeThis study aims to investigate the heat transfer and flow resistance characteristics of FNaBe salt on the tube side of an HCHX, and develop empirical correlations for molten salt flow in helical tubes.MethodsFirstly, a computational model of HCHX including a single helical tube with shell-side and tube-side fluids was established. Then, Computational Fluid Dynamics (CFD) with SST k-ω turbulence model was employed to simulate the heat transfer and flow resistance characteristics of FNaBe salt within the tube side, focusing particularly on the effects of structural parameters (tube diameter, helical diameter, helical angle), molten salt inlet temperatures, and velocities on the Nusselt number (Nu) and friction factor (f). Finally, the numerical simulation results were comparatively evaluated with predictions from existing empirical correlations for both helical and straight tubes. Based on the numerical simulation data, empirical correlations for Nu and f of FNaBe salt on the HCHX tube side, which incorporate the helical curvature ratio, were developed using multiple nonlinear regression.ResultsThe numerical simulation results are in good agreement with existing experimental data from the literature, validating the accuracy of the CFD numerical simulation. Both the Nu and f increase with decreasing helical diameter and increasing tube diameter. Reducing the helical diameter from 572 mm to 176 mm intensifies centrifugal effects in molten salt, thereby enhancing secondary flows and increasing Nu by 7%~14% and f by 13%~19%. In contrast, the helical angle has a negligible influence on the heat transfer and flow resistance characteristics within the studied parameters range. Comparison of the numerical simulation results with existing correlations reveals that correlations developed for traditional fluids are inadequate for predicting the heat transfer and flow resistance characteristics of FNaBe salt, yielding maximum deviations of 65% for Nu and 15% for f. Furthermore, the secondary flow generated by centrifugal forces in helical tubes enhances heat transfer and flow resistance, resulting in higher Nu and f compared to straight-tube correlations.ConclusionsThe new developed empirical correlations in this study exhibit deviations of -8%⁓5% for Nu and -5%⁓5% for f from the numerical simulation results, providing a theoretical foundation for the design of compact heat exchangers in molten salt reactors.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: