Answers are grounded in this paper and cite their sources.
Demonstrates improved stability and efficiency in perovskite solar cells, highlighting the promise of interfacial modification.
Despite achieving high power conversion efficiency (PCE), the large-scale commercialization of perovskite solar cells (PSCs) remains limited by the poor stability of three-dimensional (3D) perovskites. Here, a two-dimensional (2D) perovskite-based interface engineering strategy is employed to improve device stability. A thin capping layer of 2D perovskite, 4-fluorobenzylammonium lead bromide ((4-FBA)2PbBr4) is deposited on the 3D mixed-cation methylammonium–formamidinium lead iodide (MAFAPbI3) perovskite layer. The incorporation of this 2D layer significantly improves the film morphology, suppresses trap-state density, and enhances environmental robustness. The optimized 3D/2D hybrid device achieves PCEs of 18.40% under 1 sun and 34.54% under indoor LED illumination (1000 lux). Notably, the device exhibits enhanced stability, retaining 77.82% of its initial efficiency after thermal heating at 80 °C for 10 h and 55.32% after 30 days of storage under ambient air. These results highlight the efficacy of interfacial passivation engineering in developing high-performance and stable PSCs for both outdoor and indoor applications.
No takes yet. Share an insight, caveat, or question.
Gayen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: