Answers are grounded in this paper and cite their sources.
Laboratory tests examine the friction of rubber protrusions on various surfaces, suggesting potential slip prevention.
ABSTRACTIt is necessary to reduce slip and fall in bathrooms, workshops, kid gardens, halls and walking yards. The present work aims to test the frictional behavior of rubber semi-spherical balls of different diameter and hardness to have specific information about their friction coefficient and evaluate their performance in increasing friction coefficient at dry, water, detergent wetted and oil lubricated floorings. The tested semi-spherical rubber protrusions were aimed to be used as protrusions in the rubber mat. They were of diameters ranging from 29 to 42 mm. The hardness ranged from 37.1 to 75.3 Shore A. Tests were carried out using test rig designed for that purpose. Loads were applied by wear foot of smooth rubber surface up to 250 N. The normal and friction forces were measured to determine the static friction coefficient. It was found that friction coefficient decreased with increasing normal load and hardness. Friction coefficient drastically decreased with increasing hardness when sliding against water, detergent and oil lubricated rubber. It showed significant increase with increasing the diameter of the semi-spherical protrusions. This behavior depended on the ability of the semi-spherical protrusion to allow the water to escape from the contact area, where the contact is between rubber against rubber interfaces. Sliding against detergent wetted rubber showed relatively higher friction coefficient up to 0.25 at protrusions diameter of 42 mm. This is a promising result and can be used in application to avoid slip on detergent wetted surfaces.
No takes yet. Share an insight, caveat, or question.
El-Sherbiny et al. (2013) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: