Answers are grounded in this paper and cite their sources.
Study designs an innovative trajectory to lower drilling costs in shale reservoirs, suggesting practical benefits for small operators.
Designing 3‐dimensional (3D) horizontal well trajectories is critical for enhancing drilling efficiency in shale reservoirs. The objective of this work is to develop an easy‐to‐drill 3D trajectory to cut drilling cost in the development of shale oil/gas reservoirs. A new type of 3D trajectory is proposed to make well drillable with classical deflection tools rather than sophisticated modern defection tools. The new type of trajectory contains two curve sections in orthogonal orientation and is thus called Orthogonal‐Arc Trajectory (OAT). The two curve sections have the same curvature so that they can be drilled with the same deflection tool of constant curvature. A complete set of equations in closed form and a procedure of using the equations to design OAT are presented. An example design of OAT is demonstrated. The feature of single constant curvature of the OAT enables the use of simple and economical deflection tools to reduce drilling costs, which is particularly significant for small‐scale operators. It offers practical values for drilling optimization in regions where modern drilling tools, such as AutoTrak, Power Drive, and Geo‐Pilot, are not accessible or too expensive to use. Comparing to the radius of curvature trajectory and the constant turn rate trajectory, the OAT gives the lowest drag and torque that will reduce drilling complications and thus increase drilling safety. The OAT is specially applicable to drilling geothermal wells where the hot temperature of earth rock prevents using sophisticated modern defection tools that contain delicate electronic parts with temperature limit.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: