Answers are grounded in this paper and cite their sources.
Shows enhanced tribological resistance in CoCrNi alloy, indicating improved material durability.
Cryogenic friction stir processing (CFSP) was applied to tailor the near-surface microstructure of a CoCrNi medium-entropy alloy and its tribological response. CFSP produced an ultrafine, twin-rich surface layer that significantly modified oxidation behavior and subsurface deformation during sliding. The CFSP sample formed a thin, dense, and stable Cr-rich amorphous tribo-oxide film, while the base material and air-processed alloy developed thick, cracked oxides prone to delamination. Beneath the CFSP tribo-layer, severe shear was accommodated through rapid grain subdivision, stacking-fault formation, and nano-twinning, effectively suppressing crack initiation. In contrast, the other samples experienced pronounced microcracking and abrasive wear. The results reveal that wear resistance in low-SFE alloys is controlled not by initial hardness but by tribo-oxide stability and the microstructural capacity to withstand friction-induced deformation. This work provides mechanistic guidance for microstructure-engineered wear optimization in medium-entropy alloys.
No takes yet. Share an insight, caveat, or question.
Xu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: